flat roof tapered system
IB Roof Systems

Flat Roof Tapered System

Redmond, WA

01 Overview

Description:

This is a project located in Redmond, WA where we installed a 60-mil PVC membrane by IB Roof Systems along with a flat roof tapered system. When we first responded, we found that the PVC roof system then in place was not installed correctly. Specifically, it was attached with hammer-tacker staples, had no vapor barrier or slip sheet underneath, and was not terminated properly at roof edges. The old roof system was 8 years old with leaks developing within the first 2 years. Frustrated with the previous contractor’s workmanship, the owners looked to an IB certified contractor. Don’t trust your flat or low-slope roofing needs to the average roofer. Call a flat roof specialist. Call an IB Contractor. Call Pinnacle Roofing Professionals. 206.919.3538.

Redmond Flat Roof Tapered System

Pinnacle Roofing Professionals completed this flat roof tapered system project in Redmond, Washington. We installed a 60-mil PVC membrane by IB Roof Systems along with tapered insulation to improve drainage and correct ponding issues.

Common Flat Roof Installation Defects We Found

  • Improper attachment: The old PVC membrane was attached with hammer-tacker staples instead of the manufacturer-approved fastening method.
  • Missing vapor barrier and slip sheet: The original assembly lacked the proper layers beneath the membrane, increasing condensation and abrasion risk.
  • Incorrect edge termination: The membrane was not terminated properly at roof edges, allowing water intrusion.
  • Premature failure: The roof was only 8 years old but began leaking within the first 2 years.

Why Hire an IB Certified Contractor?

Flat and low-slope roofing requires specialized installation techniques. As an IB certified contractor, Pinnacle Roofing Professionals follows manufacturer specifications for attachment, seam welding, and edge termination — giving property owners a long-term, warrantied solution.

Flat Roof and Tapered System Services in Redmond

Tapered insulation systems are used to create positive slope and improve drainage on flat roofs, reducing ponding water and extending the roof’s service life. If your Redmond flat or low-slope roof is leaking, sagging, or holding water, call Pinnacle Roofing Professionals for an inspection.

Schedule a Free Redmond Flat Roof Estimate

Need a flat roof specialist in Redmond, Bellevue, or the Seattle area? Call 206.919.3538 or request a free estimate from Pinnacle Roofing Professionals.